lkml.org 
[lkml]   [2020]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/5] dm: pci: Assign controller device node to root bridge
Hi Nicolas,

On Wed, 17 Jun 2020 at 13:15, Nicolas Saenz Julienne
<nsaenzjulienne@suse.de> wrote:
>
> On Tue, 2020-06-16 at 17:31 -0600, Simon Glass wrote:
> > Hi Nicolas,
> >
> > On Tue, 16 Jun 2020 at 08:09, Nicolas Saenz Julienne
> > <nsaenzjulienne@suse.de> wrote:
> > > On Tue, 2020-06-16 at 07:43 -0600, Simon Glass wrote:
> > > > Hi Nicolas,
> > > >
> > > > On Fri, 12 Jun 2020 at 10:47, Nicolas Saenz Julienne
> > > > <nsaenzjulienne@suse.de> wrote:
> > > > > There is no distinction in DT between the PCI controller device and the
> > > > > root bridge, whereas such distinction exists from dm's perspective. Make
> > > > > sure the root bridge ofnode is assigned to the controller's platform
> > > > > device node.
> > > > >
> > > > > This permits setups like this to work correctly:
> > > > >
> > > > > pcie {
> > > > > compatible = "...";
> > > > > ...
> > > > > dev {
> > > > > reg = <0 0 0 0 0>;
> > > > > ...
> > > > > };
> > > > > };
> > > > >
> > > > > Without this the dev node is assigned to the root bridge and the
> > > > > actual device search starts one level lower than expected.
> > > > >
> > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > > > ---
> > > > > drivers/pci/pci-uclass.c | 15 ++++++++++++++-
> > > > > 1 file changed, 14 insertions(+), 1 deletion(-)
> > > >
> > > > Can you update the tests to handle this case please?
> > >
> > > I'd be glad to, but I'm not familiar with the test FW in u-booy, coud give
> > > me
> > > some pointers on where/how to test this?
> > >
> >
> > Yes it is at test/dm/pci.c and the device tree is test.dts
> >
> > 'make qcheck' to run all tests. To run one test, build for sandbox and
> > then something like
> >
> > u-boot -T -c "ut dm pci_swapcase"
> >
> > for example.
> >
> > You can perhaps use an existing PCI controller in test.dts but feel
> > free to add one more if you need it for your test. Make sure that you
> > don't break other tests.
>
> Thanks for the info.
>
> Actually adding the tests made me doubleguess myself, and now I'm pretty sure
> that what I shoudl've done in DT is the following:
>
> &pcie0 {
> pci@0 {
> #address-cells = <3>;
> #size-cells = <2>;
> ranges;
>
> reg = <0 0 0 0 0>;
>
> usb@1,0 {
> reg = <0x10000 0 0 0 0>;
> resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
> };
> };
> };
>
>
> (with "lspci -tv": [0000:00]---00.0-[01]----00.0 VIA Technologies, Inc. VL805 USB 3.0 Host Controller)
>
> With this the patch above isn't needed, which is great.
>
> I'll send this to upstream Linux just to get a confirmation this is correct,
> although if you have any comments it'll be appreciated.

Yes it looks OK to me. U-Boot allows PCI and USB devices to be
represented in the device tree.

Regards,
Simon

\
 
 \ /
  Last update: 2020-06-26 03:13    [W:0.073 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site