lkml.org 
[lkml]   [2020]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] Add initial support for RoseapplePi SBC
Date
This patchset enables basic support for RoseapplePi, relying exclusively
on the existing infrastructure for the Actions Semi Sxx SoCs (thank you
Andreas and Manni for making this possible).

The SBC is powered by the Actions Semi S500 SoC and comes with 2GB RAM,
uSD slot and optional eMMC storage. For more details, please check:
http://roseapplepi.org/index.php/spec/

The upcoming patches will improve this initial support by adding the
missing bits and pieces to the S500 clock management unit, which is a
prerequisite for providing an S500 pinctrl and gpio driver, in order to
eventually enable access to additional functionality like I2C and MMC.

Thanks and regards,
Cristian Ciocaltea

Cristian Ciocaltea (4):
arm: dts: owl-s500: Fix incorrect PPI interrupt specifiers
dt-bindings: Add vendor prefix for RoseapplePi.org
dt-bindings: arm: actions: Document RoseapplePi
arm: dts: owl-s500: Add RoseapplePi

.../devicetree/bindings/arm/actions.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/owl-s500-roseapplepi.dts | 47 +++++++++++++++++++
arch/arm/boot/dts/owl-s500.dtsi | 6 +--
5 files changed, 54 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/owl-s500-roseapplepi.dts

--
2.27.0

\
 
 \ /
  Last update: 2020-06-15 02:01    [W:1.305 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site