lkml.org 
[lkml]   [2020]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] mvpp2: enable rxhash only on the first port
Date
Currently rxhash only works on the first port of the CP (Communication
Processor). Enabling it on other ports completely blocks packet reception.
This patch only adds rxhash as supported feature to the first port,
so rxhash can't be enabled on other ports:

# ethtool -K eth0 rxhash on
# ethtool -K eth1 rxhash on
# ethtool -K eth2 rxhash on
Cannot change receive-hashing
Could not change any device features
# ethtool -K eth3 rxhash on
Cannot change receive-hashing
Could not change any device features

Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 2b5dad2ec650..ba71583c7ae3 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5423,7 +5423,8 @@ static int mvpp2_port_probe(struct platform_device *pdev,
NETIF_F_HW_VLAN_CTAG_FILTER;

if (mvpp22_rss_is_supported()) {
- dev->hw_features |= NETIF_F_RXHASH;
+ if (port->id == 0)
+ dev->hw_features |= NETIF_F_RXHASH;
dev->features |= NETIF_F_NTUPLE;
}

--
2.26.2
\
 
 \ /
  Last update: 2020-05-09 16:18    [W:0.282 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site