lkml.org 
[lkml]   [2020]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 4/4] arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core using Etnaviv
From
Date
Am Sonntag, den 03.05.2020, 09:49 -0500 schrieb Adam Ford:
> On Thu, Apr 30, 2020 at 7:46 AM Schrempf Frieder
> <frieder.schrempf@kontron.de> wrote:
> > From: Frieder Schrempf <frieder.schrempf@kontron.de>
> >
> > According to the documents, the i.MX8M-Mini features a GC320 and a
> > GCNanoUltra GPU core. Etnaviv detects them as:
> >
> > etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653
> > etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341
> >
> > This seems to work fine more or less without any changes to the HWDB,
> > which still might be needed in the future to correct some features,
> > etc.
> >
> > Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> > ---
> Since not everyone uses the 3D or 2D, would it make sense to mark them
> as disabled by default and let people who need the 3D and 2D enable
> them at their respective board files?

No, devices on the SoC with no external dependencies should be always
enabled.

The board has much less influence over whether the GPU is being used
than the specific use-case. While the board designer may not even think
about using the GPUs (because no display connector present or something
like that) people using the board may still find uses for the GPU, like
doing video pipeline color space conversions or something lie that.

Regards,
Lucas

\
 
 \ /
  Last update: 2020-05-04 10:08    [W:0.284 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site