lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 4/4] arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core using Etnaviv
Date
From: Frieder Schrempf <frieder.schrempf@kontron.de>

According to the documents, the i.MX8M-Mini features a GC320 and a
GCNanoUltra GPU core. Etnaviv detects them as:

etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653
etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341

This seems to work fine more or less without any changes to the HWDB,
which still might be needed in the future to correct some features,
etc.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 36 +++++++++++++++++++++++
1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index cc7152ecedd9..1dd0a6e849d3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -937,6 +937,42 @@
status = "disabled";
};

+ gpu_3d: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU3D_ROOT>;
+ clock-names = "reg", "bus", "core";
+ assigned-clocks = <&clk IMX8MM_CLK_GPU3D_SRC>,
+ <&clk IMX8MM_CLK_GPU_AXI>,
+ <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>,<400000000>,<1000000000>;
+ };
+
+ gpu_2d: gpu@38008000 {
+ compatible = "vivante,gc";
+ reg = <0x38008000 0x8000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MM_CLK_GPU2D_ROOT>;
+ clock-names = "reg", "bus", "core";
+ assigned-clocks = <&clk IMX8MM_CLK_GPU2D_SRC>,
+ <&clk IMX8MM_CLK_GPU_AXI>,
+ <&clk IMX8MM_CLK_GPU_AHB>,
+ <&clk IMX8MM_GPU_PLL_OUT>;
+ assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>,
+ <&clk IMX8MM_SYS_PLL1_800M>,
+ <&clk IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>,<400000000>,<1000000000>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
--
2.17.1
\
 
 \ /
  Last update: 2020-04-30 14:46    [W:0.135 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site