lkml.org 
[lkml]   [2020]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/8] macintosh/adb-iop: Implement SRQ autopolling
On Sun, 31 May 2020, Geert Uytterhoeven wrote:

> Hi Finn,
>
> On Sun, May 31, 2020 at 1:20 AM Finn Thain <fthain@telegraphics.com.au> wrote:
> > The adb_driver.autopoll method is needed during ADB bus scan and device
> > address assignment. Implement this method so that the IOP's list of
> > device addresses can be updated. When the list is empty, disable SRQ
> > autopolling.
> >
> > Cc: Joshua Thompson <funaho@jurai.org>
> > Cc: Geert Uytterhoeven <geert@linux-m68k.org>
> > Tested-by: Stan Johnson <userm57@yahoo.com>
> > Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
>
> Thanks for your patch!
>
> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
>

Thanks for your tag.

> > arch/m68k/include/asm/adb_iop.h | 1 +
> > drivers/macintosh/adb-iop.c | 32 ++++++++++++++++++++++++++------
>
> As this header file is used by a single source file only, perhaps it
> should just be absorbed by the latter?

Sure, it could be absorbed by both asm/mac_iop.h and
drivers/macintosh/adb-iop.c but I don't see the point...

> Then you no longer need my Acked-by for future changes ;-)
>

But you shouldn't need to ack this kind of change in the first place.

IMHO, the arch/m68k/mac maintainer should be the one to ack changes to
both arch/m68k/include/asm/adb_iop.h and drivers/macintosh/adb-iop.c.

Not that I'm complaining (thanks again for your ack!)

\
 
 \ /
  Last update: 2020-06-01 02:15    [W:1.093 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site