lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 0/8] Board specific DLL configuration for qcom SDHC
On Fri, 22 May 2020 at 11:33, Sarthak Garg <sartgarg@codeaurora.org> wrote:
>
> Changes since V1:
> -Splitting documentation change into two patches to
> avoid confusion
> -For the rest of patches retaining Andrians Ack.
>
> Sarthak Garg (7):
> dt-bindings: mmc: Add new compatible string for sm8250 target
> dt-bindings: mmc: Add information for DLL register properties
> mmc: sdhci-msm: Update dll_config_3 as per HSR
> mmc: sdhci-msm: Update DDR_CONFIG as per device tree file
> mmc: sdhci-msm: Read and use DLL Config property from device tree file
> mmc: sdhci-msm: Introduce new ops to dump vendor specific registers
> mmc: sdhci-msm: dump vendor specific registers during error
>
> Veerabhadrarao Badiganti (1):
> mmc: host: sdhci-msm: Configure dll-user-control in dll init sequence
>
> .../devicetree/bindings/mmc/sdhci-msm.txt | 14 +++
> drivers/mmc/host/sdhci-msm.c | 103 ++++++++++++++++++++-
> drivers/mmc/host/sdhci.c | 3 +
> drivers/mmc/host/sdhci.h | 1 +
> 4 files changed, 118 insertions(+), 3 deletions(-)
>
> --
> 2.7.4
>

Applied for next, thanks!

Kind regards
Uffe

\
 
 \ /
  Last update: 2020-05-25 10:49    [W:0.132 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site