lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: nvmem: stm32: new property for data access
Date
From: Etienne Carriere <etienne.carriere@st.com>

Introduce boolean property st,non-secure-otp for OTP data located
in a factory programmed area that only secure firmware can access
by default and that shall be reachable from the non-secure world.

This change also allows additional properties for NVMEM nodes that
were forbidden prior this change.

Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
---
Changes since v1:
Change nvmem.yaml to allow additional properties in NVMEM nodes.

Link to v1:
https://lore.kernel.org/patchwork/patch/1239028/

.../devicetree/bindings/nvmem/nvmem.yaml | 2 --
.../bindings/nvmem/st,stm32-romem.yaml | 17 +++++++++++++++++
2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 65980224d550..b459f9dba6c9 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -67,8 +67,6 @@ patternProperties:
required:
- reg

- additionalProperties: false
-
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index d84deb4774a4..c11c99f085d7 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -24,6 +24,18 @@ properties:
- st,stm32f4-otp
- st,stm32mp15-bsec

+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+
+ properties:
+ st,non-secure-otp:
+ description: |
+ This property explicits a factory programmed area that both secure
+ and non-secure worlds can access. It is needed when, by default, the
+ related area can only be reached by the secure world.
+ type: boolean
+
required:
- "#address-cells"
- "#size-cells"
@@ -41,6 +53,11 @@ examples:
calib@22c {
reg = <0x22c 0x2>;
};
+
+ mac_addr@e4 {
+ reg = <0xe4 0x8>;
+ st,non-secure-otp;
+ };
};

...
--
2.17.1
\
 
 \ /
  Last update: 2020-05-12 15:15    [W:0.118 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site