lkml.org 
[lkml]   [2020]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: BUG:loop:blk_update_request: I/O error, dev loop6, sector 49674 op 0x9:(WRITE_ZEROES)
From
Date
On 5/12/20 8:14 PM, Xu, Yanfei wrote:
> Hi,
>
> After operating the /dev/loop which losetup with an image placed in**tmpfs,
>
> I got the following ERROR messages:
>
> ----------------[cut here]---------------------
>
> [  183.110770] blk_update_request: I/O error, dev loop6, sector 524160 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.123949] blk_update_request: I/O error, dev loop6, sector 522 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.137123] blk_update_request: I/O error, dev loop6, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.150314] blk_update_request: I/O error, dev loop6, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.163551] blk_update_request: I/O error, dev loop6, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.176824] blk_update_request: I/O error, dev loop6, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.190029] blk_update_request: I/O error, dev loop6, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.203281] blk_update_request: I/O error, dev loop6, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.216531] blk_update_request: I/O error, dev loop6, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
> [  183.229914] blk_update_request: I/O error, dev loop6, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x1000800 phys_seg 0 prio class 0
>
>
> I have found the commit which introduce this issue by git bisect :
>
>     commit :efcfec57[loop: fix no-unmap write-zeroes request behavior]

Please CC the author of that commit too. Leaving the rest quoted below.

> Kernrel version: Linux version 5.6.0
>
> Frequency: everytime
>
> steps to reproduce:
>
>   1.git clone mainline kernel
>
>   2.compile kernel with ARCH=x86_64, and then boot the system with it
>
>     (seems other arch also can reproduce it )
>
>   3.make an image by "dd of=/tmp/image if=/dev/zero bs=1M count=256"
>
>   *4.**place the image in tmpfs directory*
>
>   5.losetup /dev/loop6 /PATH/TO/image
>
>   6.mkfs.ext2 /dev/loop6
>
>
> Any comments will be appreciated.
>
>
> Thanks,
>
> Yanfei
>
>
>
>
>


--
Jens Axboe

\
 
 \ /
  Last update: 2020-05-13 04:22    [W:0.098 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site