lkml.org 
[lkml]   [2020]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 0/4] thermal: k3: Add support for bandgap sensors
From
Date
On 09/04/2020 17:47, Daniel Lezcano wrote:
> On 09/04/2020 16:37, Tero Kristo wrote:
>> On 09/04/2020 17:07, J, KEERTHY wrote:
>>>
>>>
>>> On 4/9/2020 7:19 PM, Daniel Lezcano wrote:
>>>>
>>>> Hi Keerthy,
>>>>
>>>> On 07/04/2020 07:51, Keerthy wrote:
>>>>> Add VTM thermal support. In the Voltage Thermal
>>>>> Management Module(VTM), K3 AM654 supplies a voltage
>>>>> reference and a temperature sensor feature that are gathered in the
>>>>> band
>>>>> gap voltage and temperature sensor (VBGAPTS) module. The band
>>>>> gap provides current and voltage reference for its internal
>>>>> circuits and other analog IP blocks. The analog-to-digital
>>>>> converter (ADC) produces an output value that is proportional
>>>>> to the silicon temperature.
>>>>>
>>>>> Add support for bandgap sensors. Currently reading temperatures
>>>>> is supported.
>>>>
>>>> How do you want to proceed? Shall I take patches 1 & 2 ?
>>>
>>> +Tero
>>>
>>> Hi Tero,
>>>
>>> Can you pull 3 & 4? Or Daniel can take all 4?
>>
>> Let me pull the DT patches, that way we avoid any conflicts in the
>> arm64/dts tree. There has been quite a bit of traffic on that front
>> lately and we did mess up something with the current merge window already.
>>
>> I believe you are picking the driver side changes to 5.8?
>
> Applied patches 1 & 2

Queued patches 3 & 4 towards 5.8, thanks.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-04-27 12:22    [W:0.052 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site