lkml.org 
[lkml]   [2020]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/13] arm: dts: s5pv210: aries: Set MAX8998 GPIO pulls
Date
Make sure that the GPIOs are configured correctly
for the interrupt (otherwise it won't fire) and disable the
pulls on the DVS GPIOs which are outputs.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 7e113d750b97..000f582e9a0b 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -167,6 +167,9 @@
max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;

+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
+
regulators {
ldo2_reg: LDO2 {
regulator-name = "VALIVE_1.2V";
@@ -605,6 +608,21 @@
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};

+ pmic_dvs_pins: pmic-dvs-pins {
+ samsung,pins = "gph0-3", "gph0-4", "gph0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-val = <0>;
+ };
+
+ pmic_irq: pmic-irq {
+ samsung,pins = "gph0-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
wifi_host_wake: wifi-host-wake {
samsung,pins = "gph2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
--
2.20.1
\
 
 \ /
  Last update: 2020-04-26 20:37    [W:0.048 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site