lkml.org 
[lkml]   [2020]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v10 6/9] media: tegra: Add Tegra210 Video input driver
From
Date
26.04.2020 02:13, Dmitry Osipenko пишет:
> 24.04.2020 06:55, Sowjanya Komatineni пишет:
>> +static int __maybe_unused vi_runtime_resume(struct device *dev)
>> +{
>> + struct tegra_vi *vi = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = regulator_enable(vi->vdd);
>> + if (ret) {
>> + dev_err(dev, "failed to enable VDD supply: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = clk_set_rate(vi->clk, vi->soc->vi_max_clk_hz);
>> + if (ret) {
>> + dev_err(dev, "failed to set vi clock rate: %d\n", ret);
>> + goto disable_vdd;
>> + }
>
> Isn't setting clock rate using assigned-clocks in a device-tree enough?
> Could you please clarify why this vi_max_clk_hz is needed?
>

In that case it should be wrong to set the clock rate in the RPM
callback because RPM works asynchronously and RPM may not be suspended
on TGP -> sensor source switch.

\
 
 \ /
  Last update: 2020-04-26 01:27    [W:0.104 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site