Messages in this thread | | | Date | Tue, 21 Apr 2020 13:33:24 +0200 | From | Oleksij Rempel <> | Subject | dsa: sja1105: regression after patch: "net: dsa: configure the MTU for switch ports" |
| |
Hi Vladimir,
I have a regression after this patch: |commit bfcb813203e619a8960a819bf533ad2a108d8105 |Author: Vladimir Oltean <vladimir.oltean@nxp.com> | | net: dsa: configure the MTU for switch ports
with following log: [ 3.044065] sja1105 spi1.0: Probed switch chip: SJA1105Q [ 3.071385] sja1105 spi1.0: Enabled switch tagging [ 3.076484] sja1105 spi1.0: error -34 setting MTU on port 0 [ 3.082795] sja1105: probe of spi1.0 failed with error -34
this is devicetree snippet for the port 0: port@0 { reg = <0>; label = "usb"; phy-handle = <&usbeth_phy>; phy-mode = "rmii"; };
Is it know issue?
Regards, Oleksij -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | [unhandled content-type:application/pgp-signature] | |