lkml.org 
[lkml]   [2020]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] nvme/pci: Use Discard instead of Write Zeroes on SK hynix SC300
From
Date


> On Apr 18, 2020, at 03:25, Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> wrote:
>
> On 04/17/2020 01:37 AM, Kai-Heng Feng wrote:
>> After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
>> command"), SK hynix SC300 becomes very slow with the following error
>> message:
>> [ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]
>>
>> Use quirk NVME_QUIRK_DEALLOCATE_ZEROES to workaround this issue.
> Can you share
> nvme id-ctrl -H /dev/nvme0 | grep oncs -A 8
> output?
>

$ sudo nvme id-ctrl -H /dev/nvme0 | grep oncs -A 8
oncs : 0x1f
[7:7] : 0 Verify Not Supported
[6:6] : 0 Timestamp Not Supported
[5:5] : 0 Reservations Not Supported
[4:4] : 0x1 Save and Select Supported
[3:3] : 0x1 Write Zeroes Supported
[2:2] : 0x1 Data Set Management Supported
[1:1] : 0x1 Write Uncorrectable Supported
[0:0] : 0x1 Compare Supported

\
 
 \ /
  Last update: 2020-04-21 06:52    [W:0.120 / U:1.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site