Messages in this thread | | | Subject | Re: [PATCH v2] nvme/pci: Add new quirk for SK hynix PC400 NLB off-by-one bug | From | Kai-Heng Feng <> | Date | Fri, 24 Jul 2020 00:10:39 +0800 |
| |
> On Jul 24, 2020, at 00:03, Christoph Hellwig <hch@lst.de> wrote: > > On Thu, Jul 23, 2020 at 11:57:31PM +0800, Kai-Heng Feng wrote: >> After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes >> command"), SK hynix PC400 becomes very slow with the following error >> message: >> [ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0] >> >> SK Hynix PC400 has a buggy firmware that treats NLB as max value instead >> of a range, so the NLB passed isn't a valid value to the firmware. >> >> According to SK hynix there are three commands are affected: >> - Write Zeroes >> - Compare >> - Write Uncorrectable >> >> Write Uncorrectable isn't implemented yet, so add a new quirk to >> workaround the former two commands. > > compare isn't implemented either in the kernel, and we certainly > aren't going to do these quirks for passthrough. So I think we really > want a "write zeroes is buggy" quirk and just disable issuing that > command from the driver.
Ok, will send a new version based on your suggestion.
> >> >> BugLink: https://bugs.launchpad.net/bugs/1872383 >> Cc: kyounghwan sohn <kyounghwan.sohn@sk.com> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> >> --- >> v2: >> - SK hynix found the root cause so change the approach accordingly. >> - lspci is wrong, the device is PC400 instead of SC300. > > I don't remember seing a v1..
Well, because it took some time for the vendor to find the root cause... Here's the v1: https://lkml.org/lkml/2020/4/17/169
Kai-Heng
| |