Messages in this thread Patch in this message | | | From | Daniel Walker <> | Subject | [PATCH] mtd: spi-nor: Add 4B_OPCODES flag to n25q256a | Date | Fri, 17 Apr 2020 10:46:19 -0700 |
| |
The n25q256a supports 4-byte opcodes so lets add the flag. Tested on Cisco IoT platform hardware using Marvell A7040 SoC.
This patch was base on one from Guo Yi <yi.guo@cavium.com>.
Cc: xe-linux-external@cisco.com Signed-off-by: Daniel Walker <danielwa@cisco.com> --- drivers/mtd/spi-nor/micron-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c index 6c034b9718e2..471fe2bc2ba4 100644 --- a/drivers/mtd/spi-nor/micron-st.c +++ b/drivers/mtd/spi-nor/micron-st.c @@ -37,7 +37,7 @@ static const struct flash_info st_parts[] = { SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | USE_FSR | SPI_NOR_DUAL_READ | - SPI_NOR_QUAD_READ) }, + SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512, SECT_4K | USE_FSR | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, -- 2.17.1
| |