lkml.org 
[lkml]   [2020]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] fpga: doc: Add binding doc for the afi config driver
Date
This patch adds the binding document for the afi
config driver.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
.../devicetree/bindings/fpga/xlnx,zynq-afi-fpga.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynq-afi-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynq-afi-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynq-afi-fpga.txt
new file mode 100644
index 0000000..e00942c
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynq-afi-fpga.txt
@@ -0,0 +1,19 @@
+Xilinx Zynq AFI interface Manager
+
+The Zynq Processing System core provides access from PL masters to PS
+internal peripherals, and memory through AXI FIFO interface
+(AFI) interfaces.
+
+Required properties:
+-compatible: Should contain "xlnx,zynq-afi-fpga"
+-reg: Physical base address and size of the controller's register area.
+-xlnx,afi-buswidth : Size of the afi bus width.
+ 0: 64-bit AXI data width,
+ 1: 32-bit AXI data width,
+
+Example:
+afi0: afi0 {
+ compatible = "xlnx,zynq-afi-fpga";
+ reg = <0xf8008000 0x1000>;
+ xlnx,afi-buswidth = <1>;
+};
--
2.7.4
\
 
 \ /
  Last update: 2020-04-15 12:34    [W:0.050 / U:2.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site