lkml.org 
[lkml]   [2020]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v2 0/3] Add new reg_update_bits() support
Date
The Spreadtrum platform uses a special set/clear method to update
registers' bits, thus this patch set registers a physical regmap
bus into syscon core to support this feature instead of using the
MMIO bus, which is not a physical regmap bus.

Any comments are welcome. Thanks.

Changes from RFC v1:
- Add new helper to registers a physical regmap bus instead of
using the MMIO bus.

Baolin Wang (3):
mfd: syscon: Support physical regmap bus
regmap: Add bus reg_update_bits() support
soc: sprd: Add Spreadtrum special bits updating support

drivers/base/regmap/regmap.c | 1 +
drivers/mfd/syscon.c | 16 ++++++-
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/sprd/Kconfig | 16 +++++++
drivers/soc/sprd/Makefile | 2 +
drivers/soc/sprd/sprd_syscon.c | 76 ++++++++++++++++++++++++++++++++++
include/linux/mfd/syscon.h | 7 ++++
8 files changed, 118 insertions(+), 2 deletions(-)
create mode 100644 drivers/soc/sprd/Kconfig
create mode 100644 drivers/soc/sprd/Makefile
create mode 100644 drivers/soc/sprd/sprd_syscon.c

--
2.17.1

\
 
 \ /
  Last update: 2020-04-13 08:14    [W:2.217 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site