lkml.org 
[lkml]   [2020]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/6] iio: accel: adxl372: Update sysfs docs
On Tue, 25 Feb 2020 14:09:09 +0200
Alexandru Tachici <alexandru.tachici@analog.com> wrote:

> This patch adds entries in the syfs docs of ADXL372.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
> ---
> .../ABI/testing/sysfs-bus-iio-accel-adxl372 | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
> new file mode 100644
> index 000000000000..709376b54bec
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
> @@ -0,0 +1,30 @@
> +What: /sys/bus/iio/devices/iio:deviceX/buffer_peak_mode_enable
> +KernelVersion:
> +Contact: linux-iio@vger.kernel.org
> +Description:
> + This attribute allows to configure the FIFO to store sample
> + sets of impact event peak (x, y, z). As a precondition, all
> + three channels (x, y, z) need to be enabled.
> + Writing 1, peak fifo mode will be enabled, if cleared and
> + all three channels are enabled, sample sets of concurrent
> + 3-axis data will be stored in the FIFO.

As this is referring to the internal fifo (I think!) should we name it
hwfifo_peak_mode_enable to separate it from being related to the software "buffer"?


> +
> +What: /sys/bus/iio/devices/iio:deviceX/activity_detect_event
> +KernelVersion:
> +Contact: linux-iio@vger.kernel.org
> +Description:
> + adxl372 works in loop mode. It will loop between activity
> + and inactivity detection mode. The thresh_rising sysfs files
> + found in events/ need to be configured in order to define when
> + the device will mark a sensed acceleration over a period of
> + time as activity.

Hmm. As you noted in the cover letter this is a bit odd having a mixture of
an event and a more fundamental state control.

Please state what value this will provide when read.

> +
> +What: /sys/bus/iio/devices/iio:deviceX/inactivity_detect_event
> +KernelVersion:
> +Contact: linux-iio@vger.kernel.org
> +Description:
> + adxl372 works in loop mode. It will loop between activity
> + and inactivity detection mode. The thresh_falling sysfs files
> + found in events/ need to be configured in order to define when
> + the device will mark a sensed acceleration over a period of
> + time as inactivity.

\
 
 \ /
  Last update: 2020-03-07 13:11    [W:0.050 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site