lkml.org 
[lkml]   [2020]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] iio: accel: adxl372: Update sysfs docs
Date
This patch adds entries in the syfs docs of ADXL372.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
.../ABI/testing/sysfs-bus-iio-accel-adxl372 | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
new file mode 100644
index 000000000000..709376b54bec
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
@@ -0,0 +1,30 @@
+What: /sys/bus/iio/devices/iio:deviceX/buffer_peak_mode_enable
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute allows to configure the FIFO to store sample
+ sets of impact event peak (x, y, z). As a precondition, all
+ three channels (x, y, z) need to be enabled.
+ Writing 1, peak fifo mode will be enabled, if cleared and
+ all three channels are enabled, sample sets of concurrent
+ 3-axis data will be stored in the FIFO.
+
+What: /sys/bus/iio/devices/iio:deviceX/activity_detect_event
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ adxl372 works in loop mode. It will loop between activity
+ and inactivity detection mode. The thresh_rising sysfs files
+ found in events/ need to be configured in order to define when
+ the device will mark a sensed acceleration over a period of
+ time as activity.
+
+What: /sys/bus/iio/devices/iio:deviceX/inactivity_detect_event
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ adxl372 works in loop mode. It will loop between activity
+ and inactivity detection mode. The thresh_falling sysfs files
+ found in events/ need to be configured in order to define when
+ the device will mark a sensed acceleration over a period of
+ time as inactivity.
--
2.20.1
\
 
 \ /
  Last update: 2020-02-25 13:10    [W:0.065 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site