Messages in this thread | | | Subject | Re: [PATCH] ASoC: tas2562: Fixed incorrect amp_level setting. | From | Dan Murphy <> | Date | Thu, 19 Mar 2020 09:01:24 -0500 |
| |
Jonghwan
On 3/19/20 9:00 AM, Jonghwan Choi wrote: > According to the tas2562 datasheet,the bits[5:1] represents the amp_level value. > So to set the amp_level value correctly,the shift value should be set to 1. > > Signed-off-by: Jonghwan Choi <charlie.jh@kakaocorp.com> > --- > sound/soc/codecs/tas2562.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c > index be52886a5edb..fb2233ca9103 100644 > --- a/sound/soc/codecs/tas2562.c > +++ b/sound/soc/codecs/tas2562.c > @@ -409,7 +409,7 @@ static const struct snd_kcontrol_new vsense_switch = > 1, 1); > > static const struct snd_kcontrol_new tas2562_snd_controls[] = { > - SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 0, 0x1c, 0, > + SOC_SINGLE_TLV("Amp Gain Volume", TAS2562_PB_CFG1, 1, 0x1c, 0, > tas2562_dac_tlv), > }; >
Acked-by: Dan Murphy <dmurphy@ti.com>
| |