lkml.org 
[lkml]   [2020]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] clk: qcom: gdsc: Handle GDSC regulator supplies
Date
Certain GDSCs, such as the GPU_GX on MSM8996, requires that the upstream
regulator supply is powered in order to be turned on.

It's not guaranteed that the bootloader will leave these supplies on and
the driver core will attempt to enable any GDSCs before allowing the
individual drivers to probe defer on the PMIC regulator driver not yet
being present.

So the gdsc driver needs to be made aware of supplying regulators and
probe defer on their absence, and it needs to enable and disable the
regulator accordingly.

Voltage adjustments of the supplying regulator are deferred to the
client drivers themselves.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/clk/qcom/gdsc.c | 24 ++++++++++++++++++++++++
drivers/clk/qcom/gdsc.h | 4 ++++
2 files changed, 28 insertions(+)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index a250f59708d8..3528789cc9d0 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -13,6 +13,7 @@
#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
#include "gdsc.h"

#define PWR_ON_MASK BIT(31)
@@ -112,6 +113,12 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)
int ret;
u32 val = (status == GDSC_ON) ? 0 : SW_COLLAPSE_MASK;

+ if (status == GDSC_ON && sc->rsupply) {
+ ret = regulator_enable(sc->rsupply);
+ if (ret < 0)
+ return ret;
+ }
+
ret = regmap_update_bits(sc->regmap, sc->gdscr, SW_COLLAPSE_MASK, val);
if (ret)
return ret;
@@ -143,6 +150,13 @@ static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)

ret = gdsc_poll_status(sc, status);
WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n");
+
+ if (!ret && status == GDSC_OFF && sc->rsupply) {
+ ret = regulator_disable(sc->rsupply);
+ if (ret < 0)
+ return ret;
+ }
+
return ret;
}

@@ -371,6 +385,16 @@ int gdsc_register(struct gdsc_desc *desc,
if (!data->domains)
return -ENOMEM;

+ /* Resolve any regulator supplies */
+ for (i = 0; i < num; i++) {
+ if (!scs[i] || !scs[i]->supply)
+ continue;
+
+ scs[i]->rsupply = devm_regulator_get(dev, scs[i]->supply);
+ if (IS_ERR(scs[i]->rsupply))
+ return PTR_ERR(scs[i]->rsupply);
+ }
+
data->num_domains = num;
for (i = 0; i < num; i++) {
if (!scs[i])
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index 64cdc8cf0d4d..c36fc26dcdff 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -10,6 +10,7 @@
#include <linux/pm_domain.h>

struct regmap;
+struct regulator;
struct reset_controller_dev;

/**
@@ -52,6 +53,9 @@ struct gdsc {
struct reset_controller_dev *rcdev;
unsigned int *resets;
unsigned int reset_count;
+
+ const char *supply;
+ struct regulator *rsupply;
};

struct gdsc_desc {
--
2.24.0
\
 
 \ /
  Last update: 2020-03-19 06:40    [W:0.093 / U:4.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site