lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: soc: qcom: fix IPA binding
Date
The definitions for the "qcom,smem-states" and "qcom,smem-state-names"
properties need to list their "$ref" under an "allOf" keyword.

In addition, fix two problems in the example at the end:
- Use #include for header files that define needed symbolic values
- Terminate the line that includes the "ipa-shared" register space
name with a comma rather than a semicolon

Finally, update some white space in the example for better alignment.

Signed-off-by: Alex Elder <elder@linaro.org>
---

The IPA driver (including "qcom,ipa.yaml") landed in the net-next
tree last week, so this patch is built upon that. This probably
means this patch should be taken through net-next as well, but
I'll leave that to the maintainers to work out.

-Alex

.../devicetree/bindings/net/qcom,ipa.yaml | 32 +++++++++++--------
1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 91d08f2c7791..140f15245654 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -87,14 +87,16 @@ properties:
- const: config

qcom,smem-states:
- $ref: /schemas/types.yaml#/definitions/phandle-array
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle-array
description: State bits used in by the AP to signal the modem.
items:
- description: Whether the "ipa-clock-enabled" state bit is valid
- description: Whether the IPA clock is enabled (if valid)

qcom,smem-state-names:
- $ref: /schemas/types.yaml#/definitions/string-array
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string-array
description: The names of the state bits used for SMP2P output
items:
- const: ipa-clock-enabled-valid
@@ -139,6 +141,10 @@ oneOf:

examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+
smp2p-mpss {
compatible = "qcom,smp2p";
ipa_smp2p_out: ipa-ap-to-modem {
@@ -162,17 +168,17 @@ examples:
<0 0x1e47000 0 0x2000>,
<0 0x1e04000 0 0x2c000>;
reg-names = "ipa-reg",
- "ipa-shared";
- "gsi";
+ "ipa-shared",
+ "gsi";

interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
- <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
- <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
- "gsi",
- "ipa-clock-query",
- "ipa-setup-ready";
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";

clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
@@ -182,11 +188,11 @@ examples:
<&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>,
<&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>;
interconnect-names = "memory",
- "imem",
- "config";
+ "imem",
+ "config";

qcom,smem-states = <&ipa_smp2p_out 0>,
- <&ipa_smp2p_out 1>;
+ <&ipa_smp2p_out 1>;
qcom,smem-state-names = "ipa-clock-enabled-valid",
"ipa-clock-enabled";
};
--
2.20.1
\
 
 \ /
  Last update: 2020-03-11 22:47    [W:0.038 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site