lkml.org 
[lkml]   [2020]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: dts: sun8i-h3: Add thermal trip points/cooling maps
On Mon, Feb 24, 2020 at 05:54:46PM +0100, Ondrej Jirman wrote:
> This enables passive cooling by down-regulating CPU voltage
> and frequency.
>
> For trip points, I used a slightly lowered values from the BSP
> code. The critical temperature of 110°C from BSP code seemed
> like a lot, so I rounded it off to 100°C.
>
> The critical trip point value is 30°C above the maximum recommended
> ambient temperature (70°C) for the SoC from the datasheet, so there's
> some headroom even at such a high ambient temperature.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>

Applied, thanks

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-02-25 10:05    [W:0.042 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site