lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec
Date
We are still experiencing some packet loss with the existing advanced
congestion buffering (ACB) settings with the IMP port configured for
2Gb/sec, so revert to conservative link speeds that do not produce
packet loss until this is resolved.

Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index d1955543acd1..b0f5280a83cb 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -69,8 +69,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
/* Force link status for IMP port */
reg = core_readl(priv, offset);
reg |= (MII_SW_OR | LINK_STS);
- if (priv->type == BCM7278_DEVICE_ID)
- reg |= GMII_SPEED_UP_2G;
+ reg &= ~GMII_SPEED_UP_2G;
core_writel(priv, reg, offset);

/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
--
2.17.1
\
 
 \ /
  Last update: 2020-02-25 00:57    [W:0.031 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site