Messages in this thread | | | From | Andreas Kemnade <> | Subject | [PATCH v5 0/2] mfd: rn5t618: add ADC support | Date | Sun, 23 Feb 2020 14:16:36 +0100 |
| |
This series adds support for the ADC in the RN5T618/RC5T619. It depends on the IRQ support added in the RTC support series here: https://lore.kernel.org/lkml/20191220122416.31881-1-andreas@kemnade.info/
I tested the driver only with the RC5T619 but it should work with the with the RN5T618 as well based on these facts: - The corresponding register definitions originally went into the kernel for the RN5T618 - Public datasheet sections about the ADC look same. - Out-of-tree code for these chips look same regarding to ADC
But due to missing hardware I cannot test the patches 2/3 and 3/3 which add support for the RN5T618 ADC. I marked these untested patches as RFC, and IMHO they require a Tested-By. Feel free to ignore them if the whole series would be delayed just because of missing Tested-By for those.
Changes in v5: - fixed typo
Changes in v4: - drop RFC patches, seems nobody finds time to test now - added trivial change and Reviewed-By
Changes in v3: - re-included former 2/5 of these patches, since it was not applied
Changes in v2: - got an "Applied, thanks" message for the first two, so I do not include them anymore - some cleanups for the ADC driver itself
Andreas Kemnade (2): mfd: rn5t618: add ADC subdevice for RC5T619 iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
drivers/iio/adc/Kconfig | 10 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/rn5t618-adc.c | 256 ++++++++++++++++++++++++++++++++++ drivers/mfd/rn5t618.c | 1 + 4 files changed, 268 insertions(+) create mode 100644 drivers/iio/adc/rn5t618-adc.c
-- 2.20.1
| |