lkml.org 
[lkml]   [2020]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: mmc: Convert Cadence SD/SDIO/eMMC controller to json-schema
Date
Convert the Cadence SD/SDIO/eMMC host controller IP (a.k.a. SD4HC)
binding to DT schema format.

Socionext UniPhier ARM 64-bit SoCs are integrated with this IP.

Cc: Piotr Sroka <piotrs@cadence.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

I wanted to keep some precious comments, which apply to multiple
properties.

I do not think 'description:' is a good fit for this.

I was searching for a way to insert a comment line that does not
affect the schema.

The $comment did not work. I just use '#', which is YAML comment.
If there is a better way, please let me know.


Changes in v2:
- fix schema warning in example

.../devicetree/bindings/mmc/cdns,sdhci.yaml | 143 ++++++++++++++++++
.../devicetree/bindings/mmc/sdhci-cadence.txt | 80 ----------
2 files changed, 143 insertions(+), 80 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-cadence.txt

diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
new file mode 100644
index 000000000000..2f45dd0d04db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+ - Piotr Sroka <piotrs@cadence.com>
+
+allOf:
+ - $ref: mmc-controller.yaml
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - socionext,uniphier-sd4hc
+ - const: cdns,sd4hc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ # PHY DLL input delays:
+ # They are used to delay the data valid window, and align the window to
+ # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+ # and it is increased by 2.5ns in each step.
+
+ cdns,phy-input-delay-sd-highspeed:
+ description: Value of the delay in the input path for SD high-speed timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-legacy:
+ description: Value of the delay in the input path for legacy timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-sdr12:
+ description: Value of the delay in the input path for SD UHS SDR12 timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-sdr25:
+ description: Value of the delay in the input path for SD UHS SDR25 timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-sdr50:
+ description: Value of the delay in the input path for SD UHS SDR50 timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-sd-uhs-ddr50:
+ description: Value of the delay in the input path for SD UHS DDR50 timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-mmc-highspeed:
+ description: Value of the delay in the input path for MMC high-speed timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ cdns,phy-input-delay-mmc-ddr:
+ description: Value of the delay in the input path for eMMC high-speed DDR timing
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x1f
+
+ # PHY DLL clock delays:
+ # Each delay property represents the fraction of the clock period.
+ # The approximate delay value will be
+ # (<delay property value>/128)*sdmclk_clock_period.
+
+ cdns,phy-dll-delay-sdclk:
+ description: |
+ Value of the delay introduced on the sdclk output for all modes except
+ HS200, HS400 and HS400_ES.
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x7f
+
+ cdns,phy-dll-delay-sdclk-hsmmc:
+ description: |
+ Value of the delay introduced on the sdclk output for HS200, HS400 and
+ HS400_ES speed modes.
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x7f
+
+ cdns,phy-dll-delay-strobe:
+ description: |
+ Value of the delay introduced on the dat_strobe input used in
+ HS400 / HS400_ES speed modes.
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ - maximum: 0x7f
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ emmc: mmc@5a000000 {
+ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+ reg = <0x5a000000 0x400>;
+ interrupts = <0 78 4>;
+ clocks = <&clk 4>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cdns,phy-dll-delay-sdclk = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
deleted file mode 100644
index fa423c277853..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-* Cadence SD/SDIO/eMMC Host Controller
-
-Required properties:
-- compatible: should be one of the following:
- "cdns,sd4hc" - default of the IP
- "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: phandle to the input clock.
-
-Optional properties:
-For eMMC configuration, supported speed modes are not indicated by the SDHCI
-Capabilities Register. Instead, the following properties should be specified
-if supported. See mmc.txt for details.
-- mmc-ddr-1_8v
-- mmc-ddr-1_2v
-- mmc-hs200-1_8v
-- mmc-hs200-1_2v
-- mmc-hs400-1_8v
-- mmc-hs400-1_2v
-
-Some PHY delays can be configured by following properties.
-PHY DLL input delays:
-They are used to delay the data valid window, and align the window
-to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
-and it is increased by 2.5ns in each step.
-- cdns,phy-input-delay-sd-highspeed:
- Value of the delay in the input path for SD high-speed timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-legacy:
- Value of the delay in the input path for legacy timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr12:
- Value of the delay in the input path for SD UHS SDR12 timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr25:
- Value of the delay in the input path for SD UHS SDR25 timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-sdr50:
- Value of the delay in the input path for SD UHS SDR50 timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-sd-uhs-ddr50:
- Value of the delay in the input path for SD UHS DDR50 timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-mmc-highspeed:
- Value of the delay in the input path for MMC high-speed timing
- Valid range = [0:0x1F].
-- cdns,phy-input-delay-mmc-ddr:
- Value of the delay in the input path for eMMC high-speed DDR timing
- Valid range = [0:0x1F].
-
-PHY DLL clock delays:
-Each delay property represents the fraction of the clock period.
-The approximate delay value will be
-(<delay property value>/128)*sdmclk_clock_period.
-- cdns,phy-dll-delay-sdclk:
- Value of the delay introduced on the sdclk output
- for all modes except HS200, HS400 and HS400_ES.
- Valid range = [0:0x7F].
-- cdns,phy-dll-delay-sdclk-hsmmc:
- Value of the delay introduced on the sdclk output
- for HS200, HS400 and HS400_ES speed modes.
- Valid range = [0:0x7F].
-- cdns,phy-dll-delay-strobe:
- Value of the delay introduced on the dat_strobe input
- used in HS400 / HS400_ES speed modes.
- Valid range = [0:0x7F].
-
-Example:
- emmc: sdhci@5a000000 {
- compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
- reg = <0x5a000000 0x400>;
- interrupts = <0 78 4>;
- clocks = <&clk 4>;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- cdns,phy-dll-delay-sdclk = <0>;
- };
--
2.17.1
\
 
 \ /
  Last update: 2020-02-22 15:37    [W:0.088 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site