lkml.org 
[lkml]   [2020]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH RFC] Toggle fifo write clk after ungating sdcc clk
Date
During GCC level clock gating of MCLK, the async FIFO
gets into some hang condition, such that for the next
transfer after MCLK ungating, first bit of CMD response
doesn't get written in to the FIFO. This cause the CPSM
to hang eventually leading to SW timeout.

To fix the issue, toggle the FIFO write clock after
MCLK ungated to get the FIFO pointers and flags to
valid states.

Ram Prakash Gupta (1):
mmc: sdhci-msm: Toggle fifo write clk after ungating sdcc clk

drivers/mmc/host/sdhci-msm.c | 43 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-02-20 10:22    [W:5.723 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site