lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 0/9] mmc: mmci: sdmmc: add sdr104 support
On Tue, 11 Feb 2020 at 15:47, Ludovic BARRE <ludovic.barre@st.com> wrote:
>
> hi Ulf
>
> Just a "gentleman ping" on this series
> https://patchwork.kernel.org/project/linux-mmc/list/?series=234011

I will have a look later this week. The merge window closed yesterday
and normally I don't queue anything but fixes during the merge window.

Anyway, apologize for the delays.

Kind regards
Uffe

>
> Regards
> Ludo
>
> Le 1/28/20 à 10:06 AM, Ludovic Barre a écrit :
> > To support the sdr104 mode, sdmmc variant needs:
> > -Hardware delay block support for sdmmc variant
> > with tuning procedure
> > -Voltage switch callbacks
> > -sdmmc revision 2.0
> >
> > V2:
> > -regroup host->mmc_ops & mmc->ops assignment
> > -add timeout define
> > -rename prep_volt_switch to pre_sig_volt_switch
> > -rename volt_switch to post_sig_volt_switch
> > -add 'why' comment for "mmc: mmci: add volt_switch callbacks"
> >
> > Ludovic Barre (9):
> > mmc: mmci: sdmmc: replace sg_dma_xxx macros
> > mmc: mmci: sdmmc: rename sdmmc_priv struct to sdmmc_idma
> > mmc: mmci: add a reference at mmc_host_ops in mmci struct
> > mmc: mmci: add private pointer for variant
> > dt-bindings: mmc: mmci: add delay block base register for sdmmc
> > mmc: mmci: sdmmc: add execute tuning with delay block
> > mmc: mmci: add volt_switch callbacks
> > mmc: mmci: sdmmc: add voltage switch functions
> > mmc: mmci: add sdmmc variant revision 2.0
> >
> > .../devicetree/bindings/mmc/mmci.txt | 2 +
> > drivers/mmc/host/mmci.c | 42 +++-
> > drivers/mmc/host/mmci.h | 8 +
> > drivers/mmc/host/mmci_stm32_sdmmc.c | 204 +++++++++++++++++-
> > 4 files changed, 248 insertions(+), 8 deletions(-)
> >

\
 
 \ /
  Last update: 2020-02-11 16:17    [W:0.200 / U:2.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site