lkml.org 
[lkml]   [2020]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] can: rcar: Update help description for CAN_RCAR_CANFD config
Date
The rcar_canfd driver supports R-Car Gen3 and RZ/G2 SoC's, update the
description to reflect this.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/net/can/rcar/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig
index 6bb0e7c052ad..a669b9ac8057 100644
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
@@ -10,13 +10,13 @@ config CAN_RCAR
be called rcar_can.

config CAN_RCAR_CANFD
- tristate "Renesas R-Car CAN FD controller"
+ tristate "Renesas R-Car Gen3 and RZ/G2 CAN FD controller"
depends on ARCH_RENESAS || ARM
help
Say Y here if you want to use CAN FD controller found on
- Renesas R-Car SoCs. The driver puts the controller in CAN FD only
- mode, which can interoperate with CAN2.0 nodes but does not support
- dedicated CAN 2.0 mode.
+ Renesas R-Car Gen3 and RZ/G2 SoCs. The driver puts the
+ controller in CAN FD only mode, which can interoperate with
+ CAN2.0 nodes but does not support dedicated CAN 2.0 mode.

To compile this driver as a module, choose M here: the module will
be called rcar_canfd.
--
2.17.1
\
 
 \ /
  Last update: 2020-12-31 17:03    [W:0.057 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site