lkml.org 
[lkml]   [2020]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] leds: gpio: Set max brightness to 1
Date
GPIO LEDs only know 2 states: ON or OFF and do not have PWM capabilities.
However, the max brightness is reported as 255.

This patch sets the max brightness value of a GPIO controlled LED to 1.

Tested on my PinePhone 1.2.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
v2 drops an obsolete change in include/linux/leds.h

drivers/leds/leds-gpio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 93f5b1b60fde..0d66f19d71ba 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -96,7 +96,8 @@ static int create_gpio_led(const struct gpio_led *template,
} else {
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
}
- led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
+ led_dat->cdev.brightness = state ? LED_ON : LED_OFF;
+ led_dat->cdev.max_brightness = LED_ON;
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
if (template->panic_indicator)
--
2.26.2
\
 
 \ /
  Last update: 2020-12-29 15:26    [W:0.040 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site