lkml.org 
[lkml]   [2020]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/11] dts: bindings: Document device tree binding for Arm TRBE
Date
This patch documents the device tree binding in use for Arm TRBE.

Cc: devicetree@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
Changes in V1:

- TRBE DT entry has been renamed as 'arm, trace-buffer-extension'

Documentation/devicetree/bindings/arm/trbe.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/trbe.txt

diff --git a/Documentation/devicetree/bindings/arm/trbe.txt b/Documentation/devicetree/bindings/arm/trbe.txt
new file mode 100644
index 0000000..001945d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/trbe.txt
@@ -0,0 +1,20 @@
+* Trace Buffer Extension (TRBE)
+
+Trace Buffer Extension (TRBE) is used for collecting trace data generated
+from a corresponding trace unit (ETE) using an in memory trace buffer.
+
+** TRBE Required properties:
+
+- compatible : should be one of:
+ "arm,trace-buffer-extension"
+
+- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
+ TRBE is only supported on a subset of the CPUs, please consult
+ the arm,gic-v3 binding for details on describing a PPI partition.
+
+** Example:
+
+trbe {
+ compatible = "arm,trace-buffer-extension";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};
--
2.7.4
\
 
 \ /
  Last update: 2020-12-23 11:07    [W:1.726 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site