lkml.org 
[lkml]   [2021]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 06/11] dts: bindings: Document device tree bindings for ETE
On Mon, Jan 04, 2021 at 02:42:08PM +0000, Suzuki K Poulose wrote:
> Hi Rob,
>
> On 1/3/21 5:02 PM, Rob Herring wrote:
> > On Wed, Dec 23, 2020 at 03:33:38PM +0530, Anshuman Khandual wrote:
> > > From: Suzuki K Poulose <suzuki.poulose@arm.com>
> > >
> > > Document the device tree bindings for Embedded Trace Extensions.
> > > ETE can be connected to legacy coresight components and thus
> > > could optionally contain a connection graph as described by
> > > the CoreSight bindings.
> > >
> > > Cc: devicetree@vger.kernel.org
> > > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> > > Cc: Mike Leach <mike.leach@linaro.org>
> > > Cc: Rob Herring <robh@kernel.org>
> > > Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
> > > Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> > > ---
> > > Documentation/devicetree/bindings/arm/ete.txt | 41 +++++++++++++++++++++++++++
> > > 1 file changed, 41 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/arm/ete.txt
> >
> > Bindings are in schema format now, please convert this.
> >
>
> Sure, will do that.
>
> > >
> > > diff --git a/Documentation/devicetree/bindings/arm/ete.txt b/Documentation/devicetree/bindings/arm/ete.txt
> > > new file mode 100644
> > > index 0000000..b52b507
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/arm/ete.txt
> > > @@ -0,0 +1,41 @@
> > > +Arm Embedded Trace Extensions
> > > +
> > > +Arm Embedded Trace Extensions (ETE) is a per CPU trace component that
> > > +allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
> > > +architecture and has extended support for future architecture changes.
> > > +The trace generated by the ETE could be stored via legacy CoreSight
> > > +components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
> > > +Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
> > > +legacy CoreSight components, a node must be listed per instance, along
> > > +with any optional connection graph as per the coresight bindings.
> > > +See bindings/arm/coresight.txt.
> > > +
> > > +** ETE Required properties:
> > > +
> > > +- compatible : should be one of:
> > > + "arm,embedded-trace-extensions"
> > > +
> > > +- cpu : the CPU phandle this ETE belongs to.
> > If this is 1:1 with CPUs, then perhaps it should be a child node of the
> > CPU nodes.
>
> Yes, it is 1:1 with the CPUs. I have tried to keep this aligned with that of
> "coresight-etm4x". The same driver handles both. The only reason why this
> was separated from the "coresight.txt" is to describe the new configurations
> possible (read, TRBE).

Would it be possible to keep the CPU handle rather than moving things under the
CPU nodes? ETMv3.x and ETMv4.x are using a handle and as Suzuki points out ETE
and ETMv4.x are sharing the same driver. Proceeding differently for the ETE
would be terribly confusing.

>
> That said, I am happy to move this under the CPU, if Mathieu is happy with
> the diversion.
>
> Thanks for the review.
>
> Suzuki

\
 
 \ /
  Last update: 2021-01-04 19:17    [W:0.160 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site