lkml.org 
[lkml]   [2020]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 2/2] fpga: dfl: look for vendor specific capability
Date
> Subject: Re: [PATCH v3 2/2] fpga: dfl: look for vendor specific capability
>
> Hi Matthew,
>
> On Mon, Nov 30, 2020 at 04:45:20PM -0800,
> matthew.gerlach@linux.intel.com wrote:
> >
> >
> > On Sat, 28 Nov 2020, Wu, Hao wrote:
> >
> > > > Subject: [PATCH v3 2/2] fpga: dfl: look for vendor specific capability
> > >
> > > Maybe we can change the title a little bit, what about
> > > fpga: dfl-pci: locate DFLs by PCIe vendor specific capability
> > >
> > > >
> > > > From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> > > >
> > > > A DFL may not begin at offset 0 of BAR 0. A PCIe vendor
> > > > specific capability can be used to specify the start of a
> > > > number of DFLs.
> > >
> > > A PCIe vendor specific extended capability is introduced by Intel to
> > > specify the start of a number of DFLs.
> >
> > Your suggestion is more precise.
> > >
> > >
> > > >
> > > > Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> > > > ---
> > > > v3: Add text and ascii art to documentation.
> > > > Ensure not to exceed PCIe config space in loop.
> > > >
> > > > v2: Update documentation for clarity.
> > > > Clean up macro names.
> > > > Use GENMASK.
> > > > Removed spurious blank lines.
> > > > Changed some calls from dev_info to dev_dbg.
> > > > Specifically check for VSEC not found, -ENODEV.
> > > > Ensure correct pci vendor id.
> > > > Remove check for page alignment.
> > > > Rename find_dfl_in_cfg to find_dfls_by_vsec.
> > > > Initialize target memory of pci_read_config_dword to invalid values
> before
> > > > use.
> > > > ---
> > > > Documentation/fpga/dfl.rst | 25 +++++++++++
> > > > drivers/fpga/dfl-pci.c | 91
> +++++++++++++++++++++++++++++++++++++-
> > > > 2 files changed, 115 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
> > > > index 0404fe6ffc74..fa0da884a818 100644
> > > > --- a/Documentation/fpga/dfl.rst
> > > > +++ b/Documentation/fpga/dfl.rst
> > > > @@ -501,6 +501,31 @@ Developer only needs to provide a sub feature
> > > > driver with matched feature id.
> > > > FME Partial Reconfiguration Sub Feature driver (see drivers/fpga/dfl-
> fme-
> > > > pr.c)
> > > > could be a reference.
> > > >
> > > > +Location of DFLs on a PCI Device
> > > > +===========================
> > > > +There are two ways of locating DFLs on a PCI Device. The original
> > >
> > > I found this new VSEC is only for PCIe device, correct? If so, let's make
> > > sure descriptions are accurate. E.g. default method for all devices
> > > and a new method for PCIe device.
> >
> > Yes, the default method can be used with PCI and PCIe device, and the
> VSEC
> > approach is PCIe, only. Documentation can be made more precise.
> >
> > >
> > > > +method assumed the start of the first DFL to offset 0 of bar 0.
> > > > +If the first node of the DFL is an FME, then further DFLs
> > > > +in the port(s) are specified in FME header registers.
> > > > +Alternatively, a vendor specific capability structure can be used to
> Maybe: a vendor specific extended capability (VSEC) ...
> > > > +specify the location of all the DFLs on the device, providing flexibility
> > > > +for the type of starting node in the DFL. Intel has reserved the
> > > > +VSEC ID of 0x43 for this purpose. The vendor specific
> > > > +data begins with a 4 byte vendor specific register for the number of
> DFLs
> > > > followed 4 byte
> > > > +Offset/BIR vendor specific registers for each DFL. Bits 2:0 of Offset/BIR
> > > > register
> > >
> > > Do we have a defined register name here? or it's named as Offset/BIR
> register?
> > > Sounds a little wired, and I see you defined it as DFLS_RES?
> >
> > The Offset/BIR terminology is also used in the MSI-X capability structure.
>
> Yeah, this intuitively made sense to me having worked with PCIe :)

I just feel that it's better to use the same register name defined in the code
below. So people can find matched information in both code and doc easily. : )

Thanks
Hao

\
 
 \ /
  Last update: 2020-12-02 10:58    [W:0.115 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site