lkml.org 
[lkml]   [2020]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/6] dt-bindings: clk: mstar msc313 mpll binding description
From
Date
Quoting Daniel Palmer (2020-11-14 05:50:40)
> Add a binding description for the MStar/SigmaStar MPLL clock block.
>
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>
> ---
> .../bindings/clock/mstar,msc313-mpll.yaml | 58 +++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
> new file mode 100644
> index 000000000000..9ddc1163b31b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/mstar,msc313-mpll.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MStar/Sigmastar MSC313 MPLL
> +
> +maintainers:
> + - Daniel Palmer <daniel@thingy.jp>
> +
> +description: |
> + The MStar/SigmaStar MSC313 and later ARMv7 chips have an MPLL block that
> + takes the external xtal input and multiplies it to create a high
> + frequency clock and divides that down into a number of clocks that
> + peripherals use.
> +
> +properties:
> + compatible:
> + const: mstar,msc313-mpll
> +
> + "#clock-cells":
> + const: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-output-names:
> + minItems: 8
> + maxItems: 8
> + description: |
> + This should provide a name for the internal PLL clock and then
> + a name for each of the divided outputs.

Is this necessary?

> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - "#clock-cells"
> + - clocks
> + - clock-output-names
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + mpll@206000 {
> + compatible = "mstar,msc313-mpll";
> + reg = <0x206000 0x200>;
> + #clock-cells = <1>;
> + clocks = <&xtal>;
> + clock-output-names = "mpll", "mpll_div_2",
> + "mpll_div_3", "mpll_div_4",
> + "mpll_div_5", "mpll_div_6",
> + "mpll_div_7", "mpll_div_10";

It looks like it can be derived in the driver.

\
 
 \ /
  Last update: 2020-12-20 04:41    [W:0.098 / U:1.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site