lkml.org 
[lkml]   [2020]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] thermal/core: Remove ms based delay fields
Date
The code does no longer use the ms unit based fields to set the
delays as they are replaced by the jiffies.

Remove them and replace their user to use the jiffies version instead.

Cc: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
---
drivers/platform/x86/acerhdf.c | 3 ++-
drivers/thermal/da9062-thermal.c | 4 ++--
drivers/thermal/gov_power_allocator.c | 2 +-
drivers/thermal/thermal_core.c | 4 +---
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 ++++--
include/linux/thermal.h | 7 -------
6 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index b6aa6e5514f4..6b8b3ab8db48 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -336,7 +336,8 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
pr_notice("interval changed to: %d\n", interval);

if (thermal)
- thermal->polling_delay = interval*1000;
+ thermal->polling_delay_jiffies =
+ round_jiffies(msecs_to_jiffies(interval * 1000));

prev_interval = interval;
}
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index 4d74994f160a..180edec34e07 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -95,7 +95,7 @@ static void da9062_thermal_poll_on(struct work_struct *work)
thermal_zone_device_update(thermal->zone,
THERMAL_EVENT_UNSPECIFIED);

- delay = msecs_to_jiffies(thermal->zone->passive_delay);
+ delay = thermal->zone->passive_delay_jiffies;
queue_delayed_work(system_freezable_wq, &thermal->work, delay);
return;
}
@@ -245,7 +245,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)

dev_dbg(&pdev->dev,
"TJUNC temperature polling period set at %d ms\n",
- thermal->zone->passive_delay);
+ jiffies_to_msecs(thermal->zone->passive_delay_jiffies));

ret = platform_get_irq_byname(pdev, "THERMAL");
if (ret < 0) {
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 7a4170a0b51f..f8c3d1e40b86 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -258,7 +258,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
* power being applied, slowing down the controller)
*/
d = mul_frac(tz->tzp->k_d, err - params->prev_err);
- d = div_frac(d, tz->passive_delay);
+ d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
params->prev_err = err;

power_range = p + i + d;
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index d96c515af3cb..b2615449b18f 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -313,7 +313,7 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz)

if (!stop && tz->passive)
thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
- else if (!stop && tz->polling_delay)
+ else if (!stop && tz->polling_delay_jiffies)
thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
else
thermal_zone_device_set_polling(tz, 0);
@@ -1307,8 +1307,6 @@ thermal_zone_device_register(const char *type, int trips, int mask,
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
- tz->passive_delay = passive_delay;
- tz->polling_delay = polling_delay;

thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 2ce4b19f312a..f84375865c97 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -166,6 +166,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
char *domain)
{
struct ti_thermal_data *data;
+ int interval;

data = ti_bandgap_get_sensor_data(bgp, id);

@@ -183,9 +184,10 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
return PTR_ERR(data->ti_thermal);
}

+ interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
+
ti_bandgap_set_sensor_data(bgp, id, data);
- ti_bandgap_write_update_interval(bgp, data->sensor_id,
- data->ti_thermal->polling_delay);
+ ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);

return 0;
}
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index d1b82c70de69..1e686404951b 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -115,13 +115,8 @@ struct thermal_cooling_device {
* @devdata: private pointer for device private data
* @trips: number of trip points the thermal zone supports
* @trips_disabled; bitmap for disabled trips
- * @passive_delay: number of milliseconds to wait between polls when
- * performing passive cooling.
* @passive_delay_jiffies: number of jiffies to wait between polls when
* performing passive cooling.
- * @polling_delay: number of milliseconds to wait between polls when
- * checking whether trip points have been crossed (0 for
- * interrupt driven systems)
* @polling_delay_jiffies: number of jiffies to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
@@ -162,8 +157,6 @@ struct thermal_zone_device {
unsigned long trips_disabled; /* bitmap for disabled trips */
unsigned long passive_delay_jiffies;
unsigned long polling_delay_jiffies;
- int passive_delay;
- int polling_delay;
int temperature;
int last_temperature;
int emul_temperature;
--
2.25.1
\
 
 \ /
  Last update: 2020-12-16 23:07    [W:0.103 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site