lkml.org 
[lkml]   [2020]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: sc7180: Enable passive polling for cpu thermal zones
Date
Enable passive polling delay for cpu thermal zone for sc7180. It
enables periodic thermal zone re-evaluation on post first trip
temperature violation.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 98050b3..79d0747 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -4355,7 +4355,7 @@

thermal-zones {
cpu0-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 1>;
@@ -4403,7 +4403,7 @@
};

cpu1-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 2>;
@@ -4451,7 +4451,7 @@
};

cpu2-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 3>;
@@ -4499,7 +4499,7 @@
};

cpu3-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 4>;
@@ -4547,7 +4547,7 @@
};

cpu4-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 5>;
@@ -4595,7 +4595,7 @@
};

cpu5-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 6>;
@@ -4643,7 +4643,7 @@
};

cpu6-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 9>;
@@ -4683,7 +4683,7 @@
};

cpu7-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 10>;
@@ -4723,7 +4723,7 @@
};

cpu8-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 11>;
@@ -4763,7 +4763,7 @@
};

cpu9-thermal {
- polling-delay-passive = <0>;
+ polling-delay-passive = <50>;
polling-delay = <0>;

thermal-sensors = <&tsens0 12>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-12-15 10:44    [W:0.033 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site