lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: qcom: sc7180: Drop pinconf on dp_hot_plug_det
Date
We shouldn't put any pinconf here in case someone decides to invert this
HPD signal or remove an external pull-down. It's better to leave that to
the board pinconf nodes, so drop it here.

Reported-by: Douglas Anderson <dianders@chromium.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Fixes: 681a607ad21a ("arm64: dts: qcom: sc7180: Add DisplayPort HPD pin dt node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 6 ------
1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 22b832fc62e3..268fa40a1774 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1468,12 +1468,6 @@ pinmux {
pins = "gpio117";
function = "dp_hot";
};
-
- pinconf {
- pins = "gpio117";
- bias-disable;
- input-enable;
- };
};

qspi_clk: qspi-clk {
--
https://chromeos.dev
\
 
 \ /
  Last update: 2020-12-15 03:05    [W:0.037 / U:1.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site