lkml.org 
[lkml]   [2020]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch 4/8] rtc: core: Make the sync offset default more realistic
On 11/12/2020 01:23:57+0100, Thomas Gleixner wrote:
> Alexandre,
>
> On Fri, Dec 11 2020 at 00:59, Alexandre Belloni wrote:
> > On 06/12/2020 22:46:17+0100, Thomas Gleixner wrote:
> >> /* Drivers can revise this default after allocating the device. */
> >> - rtc->set_offset_nsec = NSEC_PER_SEC / 2;
> >> + rtc->set_offset_nsec = 10 * NSEC_PER_MSEC;
> >
> > I did retest, on a slow 100kHz i2c bus, with a fairly inconvenient RTC,
> > The maximum offset to set the RTC was 4845533ns so I'd say 10ms is too
> > large. Should we make that 5ms ?
>
> Sure. As I said I pulled the 10 out of thin air.
>
> > Apart from that, on the series, you can add my
> > Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
>
> I'll amend the s/10/5/ throughout the series while queueing the whole
> pile in the timers/core branch unless you want it to be handled
> differently.
>

That's fine for me.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-12-11 01:34    [W:0.138 / U:1.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site