lkml.org 
[lkml]   [2020]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [patch 4/8] rtc: core: Make the sync offset default more realistic
Date
Alexandre,

On Fri, Dec 11 2020 at 00:59, Alexandre Belloni wrote:
> On 06/12/2020 22:46:17+0100, Thomas Gleixner wrote:
>> /* Drivers can revise this default after allocating the device. */
>> - rtc->set_offset_nsec = NSEC_PER_SEC / 2;
>> + rtc->set_offset_nsec = 10 * NSEC_PER_MSEC;
>
> I did retest, on a slow 100kHz i2c bus, with a fairly inconvenient RTC,
> The maximum offset to set the RTC was 4845533ns so I'd say 10ms is too
> large. Should we make that 5ms ?

Sure. As I said I pulled the 10 out of thin air.

> Apart from that, on the series, you can add my
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

I'll amend the s/10/5/ throughout the series while queueing the whole
pile in the timers/core branch unless you want it to be handled
differently.

Thanks,

tglx

\
 
 \ /
  Last update: 2020-12-11 01:29    [W:0.105 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site