lkml.org 
[lkml]   [2020]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectREPOST: Questions abount driver development and Geniatech X9320 DVB-S/S2 PCIe Tuner


-------- Original Message --------
Subject: Questions abount driver development and Geniatech X9320
DVB-S/S2 PCIe Tuner
Date: 2020-11-02 10:38
From: m.bertens@pe2mbs.nl
To: Linux Media <linux-media@vger.kernel.org>

Hi,

I'm trying to get Geniatech X9320 DVB-S/S2 PCIe Quad Tuner card working,
but i'm new to linux kernel drivers developement

It has a similar hardware configuration as TechnoTrend TT-connect
S2-4600
* D720201 USB host controller
* cy68013A USB bridge (4x)
* m88ds3103 Demodulator (4x)
* m88ts2022 Tuner (4x)

As it seems to me all components are supported by Linux, but they are
for another device.

I have taken a look in the dw2102.c driver source code, and I see that
there is firmware
loaded, my question is: where is this firmware going?: into the cy68013A
or m88ds3103 chips?
or somewhere else?.

I looked at the site Geniatech, but even that they say there is a Linux
driver
in the archive the actual implementation is not there.

I hope that there is anyone how can help me to get this card working
under Linux.


Kind regards,


Marc Bertens-Nguyen
PE2MBS

\
 
 \ /
  Last update: 2020-11-05 09:11    [W:0.099 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site