lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 0/7] Exynos: Simple QoS for exynos-bus using interconnect
From
Date
Hi Sylwester,

On 11/4/20 7:36 PM, Sylwester Nawrocki wrote:
> This patchset adds interconnect API support for the Exynos SoC "samsung,
> exynos-bus" compatible devices, which already have their corresponding
> exynos-bus driver in the devfreq subsystem. Complementing the devfreq
> driver with an interconnect functionality allows to ensure the QoS
> requirements of devices accessing the system memory (e.g. video processing
> devices) are fulfilled and aallows to avoid issues like the one discussed
> in thread [1].
>
> This patch series adds implementation of the interconnect provider per each
> "samsung,exynos-bus" compatible DT node, with one interconnect node per
> provider. The interconnect code which was previously added as a part of
> the devfreq driver has been converted to a separate platform driver.
> In the devfreq a corresponding virtual child platform device is registered.
> Integration of devfreq and interconnect frameworks is achieved through
> the PM QoS API.
>
> A sample interconnect consumer for exynos-mixer is added in patches 6/7,
> 7/7, it is currently added only for exynos4412 and allows to address the
> mixer DMA underrun error issues [1].
>
> Changes since v7:
> - drivers/interconnect/exynos renamed to drivers/interconnect/samsung,
> - added INTERCONNECT_SAMSUNG Kconfig symbol,
> - added missing driver sync_state callback,
> - improved the DT binding description,
> - added a patch adding maintainers entry,
> - updated comment in patch 7/7, typo fix (patch 1/7).
>
> The series has been tested on Odroid U3 board. It is based on v5.10-rc1.
>
> --
> Regards,
> Sylwester
>
> Changes since v6:
> - the interconnect consumer DT bindings are now used to describe dependencies
> of the interconnects (samsung,exynos-bus nodes),
> - bus-width property replaced with samsung,data-clk-ratio,
> - adaptation to recent changes in the interconnect code
> (of_icc_get_from_provider(), icc_node_add()).
>
> Changes since v5:
> - addition of "bus-width: DT property, which specifies data width
> of the interconnect bus (patches 1...2/6),
> - addition of synchronization of the interconnect bandwidth setting
> with VSYNC (patch 6/6).
>
> Changes since v3 [4] (v4 skipped to align with patchset [1]), detailed
> changes are listed in patches:
> - conversion to a separate interconnect (platform) driver,
> - an update of the DT binding documenting new optional properties:
> #interconnect-cells, samsung,interconnect-parent in "samsung,exynos-bus"
> nodes,
> - new DT properties added to the SoC, rather than to the board specific
> files.
>
> Changes since v2 [5]:
> - Use icc_std_aggregate().
> - Implement a different modification of apply_constraints() in
> drivers/interconnect/core.c (patch 03).
> - Use 'exynos,interconnect-parent-node' in the DT instead of
> 'devfreq'/'parent', depending on the bus.
> - Rebase on DT patches that deprecate the 'devfreq' DT property.
> - Improve error handling, including freeing generated IDs on failure.
> - Remove exynos_bus_icc_connect() and add exynos_bus_icc_get_parent().
>
> Changes since v1 [6]:
> - Rebase on coupled regulators patches.
> - Use dev_pm_qos_*() API instead of overriding frequency in
> exynos_bus_target().
> - Use IDR for node ID allocation.
> - Reverse order of multiplication and division in
> mixer_set_memory_bandwidth() (patch 07) to avoid integer overflow.
>
>
> References:
> [1] https://patchwork.kernel.org/patch/10861757/ (original issue)
> [2] https://www.spinics.net/lists/linux-samsung-soc/msg70014.html
> [3] https://www.spinics.net/lists/arm-kernel/msg810722.html
> [4] https://lore.kernel.org/linux-pm/20191220115653.6487-1-a.swigon@samsung.com
> [5] https://patchwork.kernel.org/cover/11054417/ (v1 of this RFC)
> [6] https://patchwork.kernel.org/cover/11152595/ (v2 of this RFC)
>
>
> Artur Świgoń (1):
> ARM: dts: exynos: Add interconnects to Exynos4412 mixer
>
> Sylwester Nawrocki (6):
> dt-bindings: devfreq: Add documentation for the interconnect
> properties
> interconnect: Add generic interconnect driver for Exynos SoCs
> MAINTAINERS: Add entry for Samsung interconnect drivers
> PM / devfreq: exynos-bus: Add registration of interconnect child
> device
> ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
> drm: exynos: mixer: Add interconnect support
>
> .../devicetree/bindings/devfreq/exynos-bus.txt | 71 +++++++-
> MAINTAINERS | 7 +
> arch/arm/boot/dts/exynos4412.dtsi | 7 +
> drivers/devfreq/exynos-bus.c | 17 ++
> drivers/gpu/drm/exynos/exynos_mixer.c | 146 ++++++++++++++-
> drivers/interconnect/Kconfig | 1 +
> drivers/interconnect/Makefile | 1 +
> drivers/interconnect/samsung/Kconfig | 13 ++
> drivers/interconnect/samsung/Makefile | 4 +
> drivers/interconnect/samsung/exynos.c | 199 +++++++++++++++++++++
> 10 files changed, 456 insertions(+), 10 deletions(-)
> create mode 100644 drivers/interconnect/samsung/Kconfig
> create mode 100644 drivers/interconnect/samsung/Makefile
> create mode 100644 drivers/interconnect/samsung/exynos.c
>

I tested it. It is well working. Thanks.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2020-11-05 03:07    [W:0.231 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site