lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 5/7] ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
Date
This patch adds the following properties for Exynos4412 interconnect
bus nodes:
- interconnects: to declare connections between nodes in order to
guarantee PM QoS requirements between nodes,
- #interconnect-cells: required by the interconnect framework,
- samsung,data-clk-ratio: which allows to specify minimum data clock
frequency corresponding to requested bandwidth for each bus.

Note that #interconnect-cells is always zero and node IDs are not
hardcoded anywhere.

Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes for v8:
- none.

Changes for v7:
- adjusted to the DT property changes: "interconnects" instead
of "samsung,interconnect-parent", "samsung,data-clk-ratio"
instead of "bus-width".

Changes for v6:
- added bus-width property in bus_dmc node.

Changes for v5:
- adjust to renamed exynos,interconnect-parent-node property,
- add properties in common exynos4412.dtsi file rather than
in Odroid specific odroid4412-odroid-common.dtsi.
---
arch/arm/boot/dts/exynos4412.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e76881d..4999e68 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -383,6 +383,8 @@
clocks = <&clock CLK_DIV_DMC>;
clock-names = "bus";
operating-points-v2 = <&bus_dmc_opp_table>;
+ samsung,data-clock-ratio = <4>;
+ #interconnect-cells = <0>;
status = "disabled";
};

@@ -452,6 +454,8 @@
clocks = <&clock CLK_DIV_GDL>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
+ interconnects = <&bus_dmc>;
+ #interconnect-cells = <0>;
status = "disabled";
};

@@ -468,6 +472,8 @@
clocks = <&clock CLK_ACLK160>;
clock-names = "bus";
operating-points-v2 = <&bus_display_opp_table>;
+ interconnects = <&bus_leftbus &bus_dmc>;
+ #interconnect-cells = <0>;
status = "disabled";
};

--
2.7.4
\
 
 \ /
  Last update: 2020-11-04 11:39    [W:0.089 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site