lkml.org 
[lkml]   [2020]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/15] usb: misc: emi26: update to use usb_control_msg_send()
Date
The newer usb_control_msg_{send|recv}() API are an improvement on the
existing usb_control_msg() as it ensures that a short read/write is treated
as an error, data can be used off the stack, and raw usb pipes need not be
created in the calling functions.
For this reason, the instance of usb_control_msg() has been replaced with
usb_control_msg_send() appropriately.

Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
---
drivers/usb/misc/emi26.c | 31 ++++++++-----------------------
1 file changed, 8 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 24d841850e05..1dd024507f40 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -27,7 +27,7 @@
#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS)

static int emi26_writememory( struct usb_device *dev, int address,
- const unsigned char *data, int length,
+ const void *data, int length,
__u8 bRequest);
static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi26_load_firmware (struct usb_device *dev);
@@ -35,22 +35,12 @@ static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *i
static void emi26_disconnect(struct usb_interface *intf);

/* thanks to drivers/usb/serial/keyspan_pda.c code */
-static int emi26_writememory (struct usb_device *dev, int address,
- const unsigned char *data, int length,
+static int emi26_writememory(struct usb_device *dev, int address,
+ const void *data, int length,
__u8 request)
{
- int result;
- unsigned char *buffer = kmemdup(data, length, GFP_KERNEL);
-
- if (!buffer) {
- dev_err(&dev->dev, "kmalloc(%d) failed.\n", length);
- return -ENOMEM;
- }
- /* Note: usb_control_msg returns negative value on error or length of the
- * data that was written! */
- result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
- kfree (buffer);
- return result;
+ return usb_control_msg_send(dev, 0, request, 0x40, address, 0,
+ data, length, 300, GFP_KERNEL);
}

/* thanks to drivers/usb/serial/keyspan_pda.c code */
@@ -77,11 +67,7 @@ static int emi26_load_firmware (struct usb_device *dev)
int err = -ENOMEM;
int i;
__u32 addr; /* Address to write */
- __u8 *buf;
-
- buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
- if (!buf)
- goto wraperr;
+ __u8 buf[FW_LOAD_SIZE];

err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev);
if (err)
@@ -133,11 +119,11 @@ static int emi26_load_firmware (struct usb_device *dev)

/* intel hex records are terminated with type 0 element */
while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
- memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
+ memcpy(&buf[i], rec->data, be16_to_cpu(rec->len));
i += be16_to_cpu(rec->len);
rec = ihex_next_binrec(rec);
}
- err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
+ err = emi26_writememory(dev, addr, &buf, i, ANCHOR_LOAD_FPGA);
if (err < 0)
goto wraperr;
} while (rec);
@@ -211,7 +197,6 @@ static int emi26_load_firmware (struct usb_device *dev)
release_firmware(bitstream_fw);
release_firmware(firmware_fw);

- kfree(buf);
return err;
}

--
2.25.1
\
 
 \ /
  Last update: 2020-11-30 02:31    [W:0.196 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site