lkml.org 
[lkml]   [2020]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors
Date
The 8-bit ov7725 sensors can also be connected to the camera daughter
board.

This patch creates a separate dtsi file for ov7725 sensors and is included
in r8a7742-iwg21d-q7-dbcm-ca.dts. The user can set VINx_SENSOR depending
on the cameras connected.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
.../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 7 ++
.../dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi | 112 ++++++++++++++++++
2 files changed, 119 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 1ab4f9771a34..915ff5fd437c 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -11,6 +11,7 @@

#define SENSOR_NONE 1
#define SENSOR_OV5640 2
+#define SENSOR_OV7725 3

/* 8bit CMOS Camera 1 (J13) */
#define CAM1_PARENT_I2C i2c0
@@ -40,6 +41,11 @@
* VIN2 interface and also the ov5640 node connected to it)
* #define VIN2_SENSOR SENSOR_NONE
*
+ * To tie VINx endpoints to ov7725_x endpoints set VINx_SENSOR to
+ * SENSOR_OV7725 for example if ov7725_3 is connected to the VIN3
+ * interface set the below (this disables the ov5640_3)
+ * #define VIN3_SENSOR SENSOR_OV7725
+ *
*/
#define VIN0_SENSOR SENSOR_OV5640
#define VIN1_SENSOR SENSOR_OV5640
@@ -47,6 +53,7 @@
#define VIN3_SENSOR SENSOR_OV5640

#include "r8a7742-iwg21d-q7-dbcm-ov5640.dtsi"
+#include "r8a7742-iwg21d-q7-dbcm-ov7725.dtsi"

#if (VIN0_SENSOR == SENSOR_NONE)
#undef VIN0_REMOTE_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi
new file mode 100644
index 000000000000..054d0a7cc5ce
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties VIN interfaces with ov7725 sensors on
+ * iWave-RZ/G1H Qseven board development platform connected with
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#if (VIN0_SENSOR == SENSOR_OV7725)
+#define OV7725_0_STATUS "okay"
+#define OV7725_0_REMOTE_EP &VIN0_EP
+#define VIN0_REMOTE_EP &ov7725_0
+#else
+#define OV7725_0_STATUS "disabled"
+#define OV7725_0_REMOTE_EP 0
+#endif
+
+#if (VIN1_SENSOR == SENSOR_OV7725)
+#define OV7725_1_STATUS "okay"
+#define OV7725_1_REMOTE_EP &VIN1_EP
+#define VIN1_REMOTE_EP &ov7725_1
+#else
+#define OV7725_1_STATUS "disabled"
+#define OV7725_1_REMOTE_EP 0
+#endif
+
+#if (VIN2_SENSOR == SENSOR_OV7725)
+#define OV7725_2_STATUS "okay"
+#define OV7725_2_REMOTE_EP &VIN2_EP
+#define VIN2_REMOTE_EP &ov7725_2
+#else
+#define OV7725_2_STATUS "disabled"
+#define OV7725_2_REMOTE_EP 0
+#endif
+
+#if (VIN3_SENSOR == SENSOR_OV7725)
+#define OV7725_3_STATUS "okay"
+#define OV7725_3_REMOTE_EP &VIN3_EP
+#define VIN3_REMOTE_EP &ov7725_3
+#else
+#define OV7725_3_STATUS "disabled"
+#define OV7725_3_REMOTE_EP 0
+#endif
+
+&CAM1_PARENT_I2C {
+ ov7725@21 {
+ compatible = "ovti,ov7725";
+ reg = <0x21>;
+ clocks = <&MCLK_CAM1>;
+ status = OV7725_0_STATUS;
+
+ port {
+ ov7725_0: endpoint {
+ bus-width = <8>;
+ bus-type = <6>;
+ remote-endpoint = <OV7725_0_REMOTE_EP>;
+ };
+ };
+ };
+};
+
+&CAM2_PARENT_I2C {
+ ov7725@21 {
+ compatible = "ovti,ov7725";
+ reg = <0x21>;
+ clocks = <&MCLK_CAM2>;
+ status = OV7725_1_STATUS;
+
+ port {
+ ov7725_1: endpoint {
+ bus-width = <8>;
+ bus-type = <6>;
+ remote-endpoint = <OV7725_1_REMOTE_EP>;
+ };
+ };
+ };
+};
+
+&CAM3_PARENT_I2C {
+ ov7725@21 {
+ compatible = "ovti,ov7725";
+ reg = <0x21>;
+ clocks = <&MCLK_CAM3>;
+ status = OV7725_2_STATUS;
+
+ port {
+ ov7725_2: endpoint {
+ bus-width = <8>;
+ bus-type = <6>;
+ remote-endpoint = <OV7725_2_REMOTE_EP>;
+ };
+ };
+ };
+};
+
+&CAM4_PARENT_I2C {
+ ov7725@21 {
+ compatible = "ovti,ov7725";
+ reg = <0x21>;
+ clocks = <&MCLK_CAM4>;
+ status = OV7725_3_STATUS;
+
+ port {
+ ov7725_3: endpoint {
+ bus-width = <8>;
+ bus-type = <6>;
+ remote-endpoint = <OV7725_3_REMOTE_EP>;
+ };
+ };
+ };
+};
--
2.17.1
\
 
 \ /
  Last update: 2020-11-26 11:31    [W:0.076 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site