lkml.org 
[lkml]   [2020]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 2/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors
Hi Prabhakar,

On Tue, Dec 15, 2020 at 03:57:32PM +0000, Lad, Prabhakar wrote:
> Hi Jacopo,
>
> Thank you for the review.
>
> On Tue, Dec 15, 2020 at 11:49 AM Jacopo Mondi <jacopo@jmondi.org> wrote:
> >
> > Hello,
> >
> > On Thu, Nov 26, 2020 at 10:30:53AM +0000, Lad Prabhakar wrote:
> > > The 8-bit ov7725 sensors can also be connected to the camera daughter
> > > board.
> > >
> > > This patch creates a separate dtsi file for ov7725 sensors and is included
> > > in r8a7742-iwg21d-q7-dbcm-ca.dts. The user can set VINx_SENSOR depending
> > > on the cameras connected.
> > >
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> > > ---
> > > .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 7 ++
> > > .../dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi | 112 ++++++++++++++++++
> > > 2 files changed, 119 insertions(+)
> > > create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725.dtsi
> > >
> > > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > > index 1ab4f9771a34..915ff5fd437c 100644
> > > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > > @@ -11,6 +11,7 @@
> > >
> > > #define SENSOR_NONE 1
> > > #define SENSOR_OV5640 2
> > > +#define SENSOR_OV7725 3
> > >
> > > /* 8bit CMOS Camera 1 (J13) */
> > > #define CAM1_PARENT_I2C i2c0
> > > @@ -40,6 +41,11 @@
> > > * VIN2 interface and also the ov5640 node connected to it)
> > > * #define VIN2_SENSOR SENSOR_NONE
> > > *
> > > + * To tie VINx endpoints to ov7725_x endpoints set VINx_SENSOR to
> > > + * SENSOR_OV7725 for example if ov7725_3 is connected to the VIN3
> > > + * interface set the below (this disables the ov5640_3)
> > > + * #define VIN3_SENSOR SENSOR_OV7725
> > > + *
> > > */
> > > #define VIN0_SENSOR SENSOR_OV5640
> > > #define VIN1_SENSOR SENSOR_OV5640
> > > @@ -47,6 +53,7 @@
> > > #define VIN3_SENSOR SENSOR_OV5640
> > >
> > > #include "r8a7742-iwg21d-q7-dbcm-ov5640.dtsi"
> > > +#include "r8a7742-iwg21d-q7-dbcm-ov7725.dtsi"
> >
> > Mmm, can't we alternatively include one .dtsi or the other depending
> > on a define symbol ? The .dtsi describe pluggable expansion boards,
> > they cannot be mixed, right ?
> >
> Since the cameras on the daughter can be mixed and matched a much
> better version of the patches [1] which handle this case elegantly has
> been posted by Geert.
>
> [1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/20201126134031.4115211-1-geert@linux-m68k.org/

Oh, I see the discussion know, sorry for the noise.

>
> Cheers,
> Prabhakar

\
 
 \ /
  Last update: 2020-12-15 17:29    [W:0.031 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site