lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/3] dt-bindings: mmc: Add optional cqe off properties
From
Date
On Mon, 2020-11-16 at 13:28 -0600, Rob Herring wrote:
> On Thu, Nov 12, 2020 at 03:52:06PM +0800, Wenbin Mei wrote:
> > Add optional properties for cqe hosts which are used to set cqe off
> > during suspend flow.
> >
> > Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> > ---
> > Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > index b96da0c7f819..457c9a84b988 100644
> > --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> > @@ -164,6 +164,13 @@ properties:
> > description:
> > enable SDIO IRQ signalling on this interface
> >
> > + cqe-off-in-suspend:
> > + $ref: /schemas/types.yaml#/definitions/flag
> > + description:
> > + After suspend, the mmc host is powered off by HW, and bring CQE register
> > + to default state, so we add the flag to re-init CQE register after resume
> > + back.
>
> The driver change is before suspend, but this says on resume...
>
> In any case, this should be implied by the SoC specific compatible.
>
Thanks for your reply, I will drop this patchset, and resend another
patchset for this issue.
> > +
> > full-pwr-cycle:
> > $ref: /schemas/types.yaml#/definitions/flag
> > description:
> > --
> > 2.18.0
> >

\
 
 \ /
  Last update: 2020-11-18 04:28    [W:0.842 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site