lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/3] dt-bindings: mmc: Add optional cqe off properties
On Thu, Nov 12, 2020 at 03:52:06PM +0800, Wenbin Mei wrote:
> Add optional properties for cqe hosts which are used to set cqe off
> during suspend flow.
>
> Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
> ---
> Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> index b96da0c7f819..457c9a84b988 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> @@ -164,6 +164,13 @@ properties:
> description:
> enable SDIO IRQ signalling on this interface
>
> + cqe-off-in-suspend:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + After suspend, the mmc host is powered off by HW, and bring CQE register
> + to default state, so we add the flag to re-init CQE register after resume
> + back.

The driver change is before suspend, but this says on resume...

In any case, this should be implied by the SoC specific compatible.

> +
> full-pwr-cycle:
> $ref: /schemas/types.yaml#/definitions/flag
> description:
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2020-11-16 20:29    [W:0.089 / U:1.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site