lkml.org 
[lkml]   [2020]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 0/2] mailbox: Add mhuv2 mailbox controller's support
Date
Hi Jassi,

Here is the updated version based on your suggestions.

I feel bad that I haven't implemented the single-word protocol as a
special case of multi-word one in the earlier attempt. Perhaps I was too
consumed by the terminology used by the ARM folks in the previous
version of the driver and the reference manual of the controller :)

V1/V4->V5

- The binding patch already had 4 versions, while the driver had only 1.
To send everything together, I had to bump the entire thing to V5.

- Removed single-word and multi-word protocols and introduced
data-transfer protocol which works with 1 or more windows.

- Moved register names to small case.

Rob, I have kept your Reviewed-by tag as is, please let me know if you
would like to revoke it.

--
Viresh

Viresh Kumar (2):
dt-bindings: mailbox : arm,mhuv2: Add bindings
mailbox: arm_mhuv2: Add driver

.../bindings/mailbox/arm,mhuv2.yaml | 209 +++
MAINTAINERS | 9 +
drivers/mailbox/Kconfig | 7 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/arm_mhuv2.c | 1136 +++++++++++++++++
include/linux/mailbox/arm_mhuv2_message.h | 20 +
6 files changed, 1383 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
create mode 100644 drivers/mailbox/arm_mhuv2.c
create mode 100644 include/linux/mailbox/arm_mhuv2_message.h

--
2.25.0.rc1.19.g042ed3e048af

\
 
 \ /
  Last update: 2020-11-17 11:03    [W:0.125 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site