lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] scsi: pm8001: pm8001_hwi: Remove unused variable 'value'
Date
Hasn't been used since 2009.

Fixes the following W=1 kernel build warning(s):

drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’:
drivers/scsi/pm8001/pm8001_hwi.c:415:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable]

Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/scsi/pm8001/pm8001_hwi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 2054c2b03d928..0a1e09b1cd580 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -416,7 +416,7 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
u32 SSCbit)
{
- u32 value, offset, i;
+ u32 offset, i;
unsigned long flags;

#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
@@ -467,7 +467,7 @@ static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
so that the written value will be 0x8090c016.
This will ensure only down-spreading SSC is enabled on the SPC.
*************************************************************/
- value = pm8001_cr32(pm8001_ha, 2, 0xd8);
+ pm8001_cr32(pm8001_ha, 2, 0xd8);
pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);

/*set the shifted destination address to 0x0 to avoid error operation */
--
2.25.1
\
 
 \ /
  Last update: 2020-11-16 11:43    [W:0.068 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site